You are here:
Only 3 Simple Steps Perfectly Clone Disk to SSD!
No satisfied with the computer’s bad performance? Tired of the slow reaction of the applications? Such phenomenon is very common for us. These problems could be caused by the HDD. Then upgrade your HDD to a new SSD could greatly improve the performance of your computer. And the falling price of SSD makes it even much easier to get the replacement.
Advantages after replacing HDD with SSD?
- Speed up your computer so it would not spend you much time on starting your computer.
- Improve the reaction and performance of the applications saved in SSD.
You have to put off the upgrade because you do not want the hassle of reinstalling everything including the system and applications. We are here to help. Professional data migration software – Renee Becca can help you. No matter you want to clone the whole disk to SSD or just migrate the system to SSD, Renee Becca can help you make this realized in 3 simple steps.
How to Clone Disk to SSD in 3 simple steps with Renee Becca?
Requirement before clone: Size of SSD ≥ Size of original system disk (Disk C)
Step 1: Launch Renee Becca and click “Clone” in the left side.
Step 2: Select the new HDD you prepared for the migration. Then click “Redeploy” to start the clone process.
What should be paid attention to before the migration?
Please make sure the target SSD is big enough to hold the operation system. You can have a check of the system size when you click “System Redeploy” in “Clone” function.
Please make sure the target SSD is big enough to hold the operation system. You can have a check of the system size when you click “System Redeploy” in “Clone” function.
Besides, Windows
Step 4: After the migration finished, please shut down the computer. Then you can boot the computer with the new SSD.
- If you can take off the original HDD disk, please take it off and connect the SSD to computer and boot the computer with the new SSD.
- If you do not want to take off the HDD, please change the boot order when computer starting. Then when you load in the system, please format the original system disk.
Requirement before clone: Size of SSD ≥ Size of original HDD disk.
Step 1: Launch Renee Becca and click “Clone” in the left side.
Step 2: Click “Hard Disk Clone” and select the destination which you want to clone your system to.
Step 3: Click “Clone” to start the clone process.
Before using the new hard disk to launch your computer, please disconnect the original hard disk from your computer.
Tips:
Tips:
After clone finish, you may find that the disk has no free space. Don’t worry! Under such circumstance, please click “Tools” in Renee Becca. And click “Disk Manager” to select the target disk and click “Extend Volume” to get the free space.
Requirement before clone: Size of SSD ≥ Size of original system disk (Disk C)
Step 1: Launch Renee Becca and click “Clone” in the left side.
Step 2: Select the new HDD you prepared for the migration. Then click “Redeploy” to start the clone process.
What should be paid attention to before the migration?
Please make sure the target SSD is big enough to hold the operation system. You can have a check of the system size when you click “System Redeploy” in “Clone” function.
Please make sure the target SSD is big enough to hold the operation system. You can have a check of the system size when you click “System Redeploy” in “Clone” function.
Besides, Windows
Step 4: After the migration finished, please shut down the computer. Then you can boot the computer with the new SSD.
- If you can take off the original HDD disk, please take it off and connect the SSD to computer and boot the computer with the new SSD.
- If you do not want to take off the HDD, please change the boot order when computer starting. Then when you load in the system, please format the original system disk.
Requirement before clone: Size of SSD ≥ Size of original HDD disk.
Step 1: Launch Renee Becca and click “Clone” in the left side.
Step 2: Click “Hard Disk Clone” and select the destination which you want to clone your system to.
Step 3: Click “Clone” to start the clone process.
Before using the new hard disk to launch your computer, please disconnect the original hard disk from your computer.
Tips:
Tips:
After clone finish, you may find that the disk has no free space. Don’t worry! Under such circumstance, please click “Tools” in Renee Becca. And click “Disk Manager” to select the target disk and click “Extend Volume” to get the free space.
No matter you want to clone the whole HDD disk to SSD or just clone the system to SSD, Renee Becca solve it in 3 simple steps! Download and try it now!
Loading comments...
